Golf Cart WHEELIES | Built 420cc Golf Cart Build Pt. 5

Aufrufe 140 068
97% 6 505 140

Today we continue wiring turn signals and brake lights for our street legal golf cart, as well as cut a piece of plywood for a seat. Then we got for a test drive, and with a little help, our 420cc golf cart does wheelies!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
-----------------GO POWER SPORTS PARTS IN TODAY'S VIDEO----------------
420cc Stage 2 kit: goo.gl/gra2F7
Go kart throttle cable with mounting bracket- never rig another throttle cable again- call for availability!
Go Power Sports: goo.gl/c2Tz6o
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandcameras
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Autos & Fahrzeuge



11 Feb 2019

street legal golf cart buildgolf cart wheelie420cc golf cartpredator golf cart



Video herunterladen:

Link wird geladen...


Meine Playlist
Später ansehen
Bigade Vor 23 Stunden
Drill out and tap left hand thread wont back out bolt and wont need tack welding . Cool vids guys keep em up .
Jase M
Jase M Vor Tag
They make powered flashers for L.E.D.s
Barbatio Vor 2 Tage
Normally closed vs Normally open
RonLaGasss Volgs
RonLaGasss Volgs Vor 2 Tage
Add a light in the middle for break light
Jacob Presler
Jacob Presler Vor 2 Tage
Those aren't hazard lights. They're just straight blinkers.
Snoozing Lion
Snoozing Lion Vor 3 Tage
My Kingdom for a center punch....
Legoman585 Vor 3 Tage
Definitely one of the coolest projects so far
Fearborne Vor 3 Tage
Apparently what u have is or is similar to a 1989 EZGo I'll send a link. facebook.com/marketplace/item/434771150385518/
N Z Z S Vor 3 Tage
DAMN!!! I Know where to go if I ever have a problem with blinkers!!! 820 comments (@ the moment), and 97% of them was everyone's 2cent on how to fix electrical issues. Even though Isaac, you said 100s of times that you have it figured out...
Caden Donahue
Caden Donahue Vor 3 Tage
Put a stage 4 670 cc in the golf cart
revtastic skidoo
revtastic skidoo Vor 3 Tage
How do you guys have no snow ?
Walter Welch
Walter Welch Vor 3 Tage
Hazards are good to have too
Barry Perkins
Barry Perkins Vor 3 Tage
Dukes of Hazzards??? LOL
billy jackson
billy jackson Vor 3 Tage
yall should put the original fly wheel back on with the charging system so it will keep the battery charged and the lights will work like they should
Christopher DeBrusk
Hey guys tech tip For you: Briggs & Stratton has a specialized tool to remove the valve springs, it doesn’t work on any other engine but Briggs & Stratton!! If you can find a set taking apart any Briggs & Stratton engine even with basic hand tools can take less than 7 minutes.
Kevin Connors
Kevin Connors Vor 3 Tage
Weld the diff
Evan Walizer
Evan Walizer Vor 4 Tage
Are you gonna add the key start for the predator
EJ S Vor 4 Tage
Trailer wire control box...
Johnny Rocket
Johnny Rocket Vor 4 Tage
The rack in the back of our coupe looks exactly like that one
Troy Crowder
Troy Crowder Vor 4 Tage
super nice job on everything you have done on the golf cart i like its nice all the way down to the smiley face lol good show guys
Bobby D
Bobby D Vor 4 Tage
Could have started with a modern digital blinker relay (saves needing to add a load.) Brakes and blinkers need to be segregated as circuits. This could be accomplished with a turn signal kit, they are pretty cheap, or use some standard bosch relays. I always hated trying to fix brake/blinker issues after people tried to fix it themselves.....lol
Copenhagen King
Copenhagen King Vor 4 Tage
You could use a resistor for the turn signal
Lincoln Michael
Lincoln Michael Vor 4 Tage
Things to do to the kart Paint or stickers Put a back seat on, make it a 4 seater New tires (My opinion if you dont like it I'm sry)
Jeffery Allison
Jeffery Allison Vor 4 Tage
Get a no load flasher - specifically for your issue with less.
Pirate Labs
Pirate Labs Vor 4 Tage
Ike would make a great NASCAR crew chief.
Noodle Vor 4 Tage
you guys should take a transmission and build a frame to mate the transmission to a predator engine.
Sorcerer Supreme
Sorcerer Supreme Vor 4 Tage
Exactly how are you going to insure that to comply with the law? Does Geico cover it?
4bangerlove Vor 4 Tage
Vehicles that use the brake lights as signals still flash with the brake on
Cee64E Vor 4 Tage
There are dedicated units for just this thing of putting turn signals on golf-carts. They even have a turn signal stalk you mount on the steering shaft. gopowersports has a lotta stuff, but sometimes you gotta look at other places. cart-accessories.everythingcarts.com/carts/Turn-Signal-Kit
Ben c
Ben c Vor 4 Tage
Drilllllll it mannn
Dale Rollis
Dale Rollis Vor 4 Tage
add 2 more lights on the back for brake in the middle
Dale Rollis
Dale Rollis Vor 4 Tage
you need an electronic flasher for leds
Logan Thompson
Logan Thompson Vor 4 Tage
Next you should do an engine swop with 670
John Flynn
John Flynn Vor 4 Tage
View #116,141 at 7:18 PM on 2/12/19 - NJ
Merlin Cantrell
Merlin Cantrell Vor 4 Tage
Just use a separate blinker on the rear
eqws d0e
eqws d0e Vor 4 Tage
8:55 thicc
superkart66 Vor 4 Tage
Run your exhaust through a 4 cylinder car muffler, it will be quiet but have very little restriction.
Fencepot Vor 4 Tage
why do you guys never think about making a chargin system??? that would help out soooooo much. even if you have to put a fricken magnet next to the flywheel with a little wire dangling off of it at least your getting some charge so you dont have to worry about battery charge and charging the battery every time you want to ride it.
El lee oh
El lee oh Vor 4 Tage
Just use a third light for break light vintage stop in the center
Harry Gillis
Harry Gillis Vor 4 Tage
Lock the Diff!!!!!
Van Diesel
Van Diesel Vor 4 Tage
Use this circuit to properly combine brake, signal, flasher and running lights at rear using 1157 bulbs or your two pattern LEDS you already have: de-vid.com/video/video-oa8Qfkw7sm4.html Uses three regular relays only. Circuit diagram included.
4 spd life
4 spd life Vor 4 Tage
Be careful welding on bolts and nuts actually weakens them the heat from welding messes with the heat treatment they go through
ulysses Downing
ulysses Downing Vor 4 Tage
Does that gulf cart have front brakes
Isaac it'll be fine
Dustin Jayne
Dustin Jayne Vor 4 Tage
Just add a 2 small Amber lights on the rear for turn signal. So much easier, keep it simple.
Kevin Dooris
Kevin Dooris Vor 4 Tage
Get a electronic flasher from Auto part store. They are for LEDs. Just make sure it says electronic flasher.
Cape Cod CNC
Cape Cod CNC Vor 4 Tage
Just use separate brake lights.
that one guy from there
get a dirtbike exhaust or something like that, when you take something that loud thru town you will awaken an angry mob :D
CaveMan Vor 4 Tage
The rear mounted rack will cause you to get stuck in certain off road situations. The light issue needs an extra light bulb for each side, one blinker and one brake.
japnam saimbi
japnam saimbi Vor 4 Tage
i cant come i live in Africa Nairobi/Kenya
Alan Gee
Alan Gee Vor 4 Tage
Train horns man! You guys have come a long way with that cart. 👍👍👍👍
neil Trombley
neil Trombley Vor 4 Tage
Get some resistors like 6ohm 50 W resistors And add those to the circuit now depending on how you have it wired underneath there you can add one or maybe two just see if that causes enough current draw so that it actually does flash
BP420A Vor 4 Tage
Use a relay. And wire it with the signal switch. It will let you switch the rear light into signal mode and stay flashing with the brakes on until you flip of the signal switch. I can make a diagram if you need one.
MurryBob Vor 4 Tage
maybe a rebranding in the Future? Carts and Cameras?
UltimateBass Vor 4 Tage
Instead of putting a ton of lamps in It, why you dont use a Resistor? xD
Tree Seeds
Tree Seeds Vor 4 Tage
Dying channel
Caleb Jakob
Caleb Jakob Vor 4 Tage
Probably gonna need a break module to fix that break light with turn signal problem. That or as StupidEarthlings said, add another amber to make it easier
Kirk Nelson
Kirk Nelson Vor 4 Tage
they make led flasher units for led lights, I got one from amazon for my ATV
Curtis  Smith
Curtis Smith Vor 4 Tage
Add a load resistor. I used a 6 ohm resistor to get rid of the hyper flash in my truck when I switched to LEDs.
jive turkey
jive turkey Vor 4 Tage
Lift it 2 inchs and put some 22" swamp lites on the back
jive turkey
jive turkey Vor 4 Tage
Street legal make it mud legal!!!
Stoke Burner
Stoke Burner Vor 4 Tage
zach stevens
zach stevens Vor 4 Tage
Loving this build! Keep up with the good work!
Nikko Vor 4 Tage
Love John's cackle as Ike's lying flat on his back at the end of the vid. Ike - you have to rig up some payback.
MRLSv8 g45
MRLSv8 g45 Vor 5 Tage
Lock the diff but the Ducati motor on it smaller drag wheels in the front lower it an spay it(N0$)
Mitch Thompson
Mitch Thompson Vor 5 Tage
Why didn't you mount the turn sign switch somewhere on the column, you know, where you can reach it while driving?
luke pm
luke pm Vor 5 Tage
Make it really quiet like an electric so it could be like a sleeper
Click bait lol all I saw was a golf kart doing wheelies
I understand when something works ok it’s ok but you need to upgrade your electrical and upgrade to a better welder It’s a matter of time before you realize you should have the proper equipment for the job hobby welder lmao Just an accident waiting to happen
Steven Delancey
Steven Delancey Vor 5 Tage
I'm probably not the first to say this but you can get a led blinker stat on Amazon for like 6 bucks I had the same problem when I put leds on my bike
Luke Coffman
Luke Coffman Vor 5 Tage
You should put the turn singles on the back just like the front ones and just have the red light for brakes just put the small yellow light right next to the red one and have the small yellow on just as a turn signal
Random projects USA
My almost complete build is so rear-heavy that I think it will wheelie, even though it only has a 212.
Ryan Bishop
Ryan Bishop Vor 5 Tage
Still like to see a proper muffler lol.
CanonFirefly Vor 5 Tage
You can put a resistor inline with the LED turn signals to increase the load to keep the repeater happy.
Justice fire eating disco panda
This time on roadkill yeah that bad You'll only get this if you watched the hole video
Deeto B
Deeto B Vor 5 Tage
You should do a video on a APC MINI CHOPPER
David Reynolds
David Reynolds Vor 5 Tage
You should set up some old time dynamos on it so that you don’t have your battery dying very quickly.
Ronald Swogger
Ronald Swogger Vor 5 Tage
Add a resistor in the led circuit. Like a BMW fault eliminator LED conversion
james13914 Vor 5 Tage
Please some how weld the diff!
Jason Ducote
Jason Ducote Vor 5 Tage
Check your ground led lights have to have a good ground too work right . I hooked up trailer lights one time did the same thing
Rob De Pauw
Rob De Pauw Vor 5 Tage
How are you going to homologate it? Love the project btw but just a question.
old650gli Vor 5 Tage
you can buy a flasher for LED lights
EvilClowns69 Vor 5 Tage
Should of mounted the horn and turning signals to the steering column unless you plan on never using it and just go with hand signals when you turn
soda 1122
soda 1122 Vor 5 Tage
Watch the part when he starts driving it make sure you have captions on
soda 1122
soda 1122 Vor 5 Tage
All these people saying do this to the light and do this to that and bla bla bla *mount a flamethrower*
TURBO 500 Vor 5 Tage
Install a 2jz engine on the golf cart, like and comment if you agree.
Minibike Spike
Minibike Spike Vor 5 Tage
still too loud put a geo metro muffler on it
GrannygearKiller Vor 5 Tage
Weld the diff!
You guys do you you can shorten a bolt that's too long right? Just thread a nut on before you make the cut if you're that worried about it.
Kylie bob
Kylie bob Vor 5 Tage
Mount a car alternator with a chain so it will charge while you drive
john smith
john smith Vor 5 Tage
i hate you jerks but i cant stop watching
Kip Griffin
Kip Griffin Vor 5 Tage
Ike flat backed while u drive off was priceless.good job guys. Id love to come hang out with u guys one day .kip from Clyde NC
thewraith1977 Vor 5 Tage
just put another small amber/orange light on the back for your turn signal, easier to wire
Shifttube Vor 5 Tage
need put like a new yz or cr or rm slincer on there its a golf cart man need to be more sleeper
James Holt
James Holt Vor 5 Tage
Either add an amber bulb for rear turn or get signal stat turn signal switch... should mount perfect to the column. Then brake turn and hazards will work proper like
AnonymousSteve Vor 5 Tage
You need to install a 5ohm resistor in your turn signal circuit to get proper blinking from your LEDs with an automotive flasher.
John Doe
John Doe Vor 5 Tage
$0.59 resistor... Nope. Adds more lights until it blinks, it'll be fine.
Samuel Corbett
Samuel Corbett Vor 5 Tage
12:49 what is that engine for right of Ike
Isaac it'll be fine
Its johns old 2.0 miata engine
Ken Bergren
Ken Bergren Vor 5 Tage
Keep having fun and building kool stuff. Wheelies and a burn out, life is good : )
Use a common resister inline on the hot lead for the turn signals. It will resolve the flasher issue.
Landon Graham
Landon Graham Vor 5 Tage
Fuse on the negative side..... really?? y’all do some really dumb things!
Nächstes Video
Peddle Boat with a Gas Motor!
I Broke My Tractor
Aufrufe 101 942
Stealing My Truck Back
Aufrufe 289 281